The Wettstetten/Ingolstadt tuner, MTM, has announced the official details on the RS6 Clubsport package announced a while ago. Thanks to some ECU modifications, the tuner was able to boost the horsepower to an astronomical level. That, in addition to an MTM stainless steel exhaust system, catalyst, and rear silencer (4-pipes, each one 80 mm with throttle valves in 2 pipes and control system), as well as other details and modified high-rev gearing, takes the 5.0 liter V10 engine to an astonishing 730 HP and 860 Nm of torque. The result is a sprint from 0 to 60 mph in 3.6 seconds and from 0 to 124 mph in 11 seconds. The RS6 won’t stop until it hits 217 mph. This was an even bigger jump than we had previously anticipated with this tuning package!
Visually speaking, the Audi RS6 Clubsport seems to have been given access to an MTM height adjustable suspension kit. This kit will allow the driver to lower the vehicle by about 10-45". The tuning package also includes a carbon diffuser, a discreet carbon front spoiler lip, BIMOTO rims in 20” or 21”, and a roll-cage. The interior will be void of any rear seats, but will feature RECARO bucket seats and a 6-point safety harness.
The aim is now, 350 km/h, where the MTM RS6 Clubsport has more power and less weight than the others. The result: more than 730 HP, around 860 Nm of torque and weight just under two tons. The 5.0 TFSI V10 Biturbo with 6-speed triptonic with DSP, after its power increase in Wettstetten/Ingolstadt, accelerates from 0 to 100 km/h in 3.6 seconds and 200 km/h will be reached just after 11 seconds.The ingredients for the “MTM RS6 Clubsport” project are clear: less weight and much more power than the series‘ car. Besides the modification of the ECU, the engineers from MTM have demonstrated technical finesse to achieve more than 730 hp and 860 Nm of torque available at 2.750 U/min. In addition to that, a MTM stainless steel exhaust system – catalyst and rear silencer (4-pipes, each one 80 mm with throttle valves in 2 pipes and control system), as well as other details and modified high-rev gearing have been built-in. About suspensions, the RS6 Clubsport gets a MTM height adjustable suspension kit that allows a 10 to 45 mm lowering. Concerning the wheel set, the BIMOTO rims in 20” or 21” are suggested with, for example, Michelin Pilot Sport PS2 Tyres in the size 305/30 ZR 21. The standard Carbon-Ceramic brakes, which Roland Mayer approves, are left on the car but stronger air brake system pipes can also be ordered on demand. Whoever wants to convert his RS6 into Clubsport is highly recommended for the MTM high power brake system with 405 x 36 mm disks and Brembo’s monobloc callipers with 6 pistons. Last but not least, MTM offers a changed front axle geometry, which, in addition to the above mentioned suspension kit, assures a much better behavior in curves.
Back to the legendary DTM V8 race car which stood out, 20 years ago, more for its driving sensations than its optic tuning. We find here also other similarities. Modification of the bodywork with a carbon diffuser and a discreet carbon front spoiler lip, which corresponds to the credo of MTM’s manager, Roland Mayer: we have to win, not with eye-catching spoilers, but with best times, best speed. When the driver’s door is open, we can see that sportiness inside as well as on the driver and co-driver seats, has replaced the comfort of the series’ car. Especially demonstrative: the roll-cage and no rear seats. On top of that, RECARO bucket seats and a 6-point safety harness, give the best driving position and best answer to our purpose: to concentrate on the driving. This is what the MTM RS6 Clubsport is all about.
Another similarity? It was almost exactly 20 years ago, that the Audi V8 DTM achieved a lot of success. And it is exactly 20 years ago that Roland Mayer decided to found his company MTM - Motoren Technik Mayer.